HoopTalent Hooping Fixtures for Baby Lock

2025-11-11T10:00:50+08:00

Vendor: HoopTalent
Type: Baby Lock
Price: 135.00

HoopTalent provides revolutionary embroidery hooping stations for your embroidery needs. Our master hooping station is designed to simplify your hooping process, making embroidery hooping faster, easier, and more accurate. With its unique design and superior functionality, the HoopTalent hooping station eliminates the challenges of hooping large quantities for the same embroidery project. When paired with our best magnetic embroidery frames which feature strong embroidery hoop magnets, you can create mighty products, save time, and increases efficiency. Now you can hooping for brother embroidery machine, Tajima, Ricoma, Bai, Happy, Melco, ZSK, Janome, Barudan, Toyota, Baby Lock embroidery machine, etc.

Hooping Revolution – Magic of MaggieFrame Magnetic Hoop

HoopTalent Hooping Station Operation Guide

For the specific steps of assembly and use, we have prepared a detailed operation guide for you. Please click the link below to view comprehensive step-by-step instructions and practical tips: View the Operation Guide

Important Notes:

5.1″ Fixture must be used with Hooping Station Kit and 5.1″x 5.1″ Magnetic Hoop

6.9″ Fixture must be used with Hooping Station Kit and 6.9″x 6.9″ Magnetic Hoop

The brackets for you varies according to your machine brand and hoop length selection.
Because the 17in by 15.5in magnetic hoop is relatively large, it is not recommended to use it with hooping station kit

FAQs

Which Baby Lock embroidery machines are these fixtures for?

They are designed for use with Baby Lock embroidery machine setups that employ magnetic frames. Common fits include Baby Lock Capella,Array 6,Intrepid 6,Endurance 6 ect. when paired with the correct brackets and matching hoop sizes. Always confirm your bracket and hoop dimensions before ordering.

What hoop sizes do the fixtures support?

Use the 5.1″ fixture with a 5.1″ × 5.1″ (130 × 130 mm) magnetic hoop, and the 6.9″ fixture with a 6.9″ × 6.9″ (175 × 175 mm) magnetic hoop. Both fixtures are used together with the HoopTalent Hooping Station Kit.

Can I use these fixtures with magnetic frames such as Mighty Hoop or MaggieFrame?

Our magnetic embroidery frames and Mighty Hoop are both magnetic hoops known for strong holding power. For Baby Lock embroidery machines, select the bracket set and size that matches your frame (e.g., 5.1″ × 5.1″ or 6.9″ × 6.9″) to ensure proper fit and alignment.

How do I install and align garments on the hooping station?

Mount the fixture on the hooping station, set centering guides and stops, place stabilizer, position the garment, then lower the magnetic frame to capture the fabric. Check the printed rulers and grid for alignment before moving the hooped garment to your Baby Lock embroidery machine.

What fabrics and applications are suitable?

Ideal for tees, hoodies, sweatshirts, totes, and towels. For thicker or stretchy fabrics, choose appropriate stabilizer and apply light, even tension so the magnets hold without distorting fibers. For caps, use a cap-specific frame for Baby Lock and the corresponding fixture.

How should I maintain the fixtures and magnetic hoops?

Keep surfaces clean and dry. Wipe with a soft cloth, remove lint and metal debris from magnets, and avoid harsh solvents. Store frames flat to protect magnets and alignment marks.

How do I choose the right brackets?

Bracket choice depends on your Baby Lock model and the hoop size. Verify the exact model designation (e.g., Baby Lock Capella,Array 6,Intrepid 6,Endurance 6 ect.) and confirm the hoop dimensions so the fixture, brackets, and magnetic frame match.

Any tips to improve accuracy and prevent fabric shift?

Pre-press garments to remove moisture, mark the centerlines, use the fixture’s rulers to square the placement, and apply only light tension. Run a trace on your Baby Lock embroidery machine before stitching to confirm needle position.